1. Install the air intake boot and connect the blow-by hose (D) to the air intake boot. 2. Tighten the clamp (B) securing the throttle body to the air intake boot. 3. Tighten the bolt (C) securing the air intake boot to the collector cover bracket. 4. Tighten the clamp (A) securing the air cleaner case (rear) to the air intake boot. Tightening torque: T1: 3 N·m (0.3 kgf-m, 2.2 ft-lb) T2: 6.5 N·m (0.7 kgf-m, 4.8 ft-lb) 5. Install the collector cover. |
Inspection
1. LATCHCheck if the latch operates normally.If the cable or rod is faulty, replace the latch & actuator assembly - front.2. LOCK ACTUATOR1. Check door lock operationCheck the door lock operation when battery voltage is applied between the connectors.Terminal No.Inspection conditionsStandard4 (+) †...