1. Install the battery sensor, and connect the connector (B) to the battery sensor. Tightening torque: 6 N·m (0.6 kgf-m, 4.4 ft-lb) 2. Attach the clip (A) to the battery holder. 3. Connect the ground terminal to battery sensor. NOTE |
Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trim panel - rear door. Door Trim > REMOVAL3. Remove the sealing cover - rear door.4. Remove the glass assembly - rear door. Rear Door Glass > REMOVAL5. Remove the rear regulator and motor assembly.(1) Disconnect the connect ...