Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

1. Temporarily install the generator bracket to the engine and tighten the bolts in the numerical order.

Tightening torque:

36 N·m (3.7 kgf-m, 26.6 ft-lb)

2. Install the V-belt tensioner. V-belt > INSTALLATION

3. Temporarily install the generator bracket to the generator and tighten the bolts in the numerical order.

Tightening torque:

25 N·m (2.5 kgf-m, 18.4 ft-lb)

4. Install the V-belt cover bracket.

Tightening torque:

6.4 N·m (0.7 kgf-m, 4.7 ft-lb)

5. Connect the connector (A) and terminal (B) to the generator, and attach the clip (C).

Tightening torque:

15 N·m (1.5 kgf-m, 11.1 ft-lb)

6. Install the V-belts. V-belt > INSTALLATION

7. Connect the ground terminal to battery sensor. NOTE

Assembly
NOTE:After assembling, manually turn the pulley to check that the rotor rotates smoothly.1. Use the following procedures to install the rectifier.(1) Remove old silicone grease on the mating surface o ...

Inspection
1. DIODECAUTION:There is the possibility of damaging the diodes if a mega-tester (used to measure high voltages) or a similar measuring instrument is used. Never use a mega tester or equivalent for th ...

Other materials:

Adjustment
1. Measure the height “A” from the ST upper face to the ball bearing catch surface.ST 499575600GAUGE2. Measure the height “B” from the ST to the mating surface of the transmission case.ST 499575600GAUGE3. Obtain the thickness of transfer drive gear shim using the follow ...

© 2017-2024 Copyright www.sulegacy.com