1. Install the starter to the transmission, and install the bolts or nuts securing the starter. NOTE: • For the MT model, a bolt is used at (a). • Tighten the starter and bracket (b) together using the upper bolt securing the starter. Tightening torque: 50 N·m (5.1 kgf-m, 36.9 ft-lb) 2. Install the terminal (B) to the starter, and connect the connector (A). Tightening torque: 10 N·m (1.0 kgf-m, 7.4 ft-lb) 3. Install the air intake boot. Air Intake Boot > INSTALLATION 4. Connect the ground terminal to battery sensor. NOTE |
Replacement
CAUTION:• Immediately after the vehicle has been running or after idling for a long time, the differential gear oil will be hot. Be careful not to burn yourself.• Be careful not to spill the differential gear oil on exhaust pipe to prevent it from emitting smoke or fire. If differential ...