1. BATTERY 1. Install the battery and battery pan. 2. Install the battery holder, and install the bolts to the battery box. NOTE: Check that the rod (b) of the battery holder is inserted into the hole (a) on the battery box and battery pan. Tightening torque: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 3. Connect the battery positive terminal. 4. Install the battery sensor. Battery Sensor > INSTALLATION 5. Connect the ground terminal to battery sensor. NOTE 2. BATTERY BOX 1. Install the battery box. Tightening torque: 37 N·m (3.8 kgf-m, 27.3 ft-lb) 2. Install the battery. Battery > INSTALLATION |
Inspection
CAUTION:Because the center pilot bearing is grease-sealed and is a non-lubrication type, do not wash with gasoline or solvents.1. If there is damage or defectiveness in the facing sliding surface or ring gear, replace the flywheel.(A)Flywheel(B)Ring gear2. Smoothness of rotationRotate the ball beari ...