Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Emission control (aux. Emission control devices)(h4do) / Pcv valve / Installation

1. Install the PCV valve onto the cylinder block RH.

NOTE:

Apply liquid gasket to the bolt threads of PCV valve.

Liquid gasket:

THREE BOND 1324 (Part No. 004403042) or equivalent

Tightening torque:

25 N·m (2.5 kgf-m, 18.4 ft-lb)

2. Connect the PCV hose to the intake manifold assembly and the PCV valve.

3. Install the air intake boot. Air Intake Boot > INSTALLATION

Inspection

1. PCV VALVE1. Check that the PCV valve has no deformation, cracks or other damages.2. Check that air is discharged from (B) when air is blown into (A).3. Check that air does not come out from (B) whe ...

Purge control solenoid valve

...

Other materials:

Dtc u0100 lost communication with ecm/pcm "a"
NOTE:Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure1. OUTLINE OF DIAGNOSIS (ENGINE TYPE FB)• Detect malfunction of CAN communication.• Judge as NG when CAN communication failure occurs with the ECM.2. EXECUTION CONDITION (ENGINE TYPE ...