Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. Install the vacuum hose to the purge control solenoid valve.
2. Connect the vacuum hose (A) and connector (B) to the purge control solenoid valve.
3. Install the bolt securing the purge control solenoid valve to the intake manifold assembly. NOTE: Hold the purge control solenoid valve unit by hand to prevent it from rotating together. Tightening torque: 3.4 N·m (0.3 kgf-m, 2.5 ft-lb) 4. Secure the vacuum hose to the clip (A), and connect the vacuum hose to the intake manifold assembly.
5. Connect the ground terminal to battery sensor. NOTE |
Inspection
1. PURGE CONTROL SOLENOID VALVE1. Check that the purge control solenoid valve has no deformation, cracks or other damages.2. Measure the resistance between the purge control solenoid valve terminals.T ...
Other materials:
Certification for immobilizer system
For models with "keyless access
with push-button start system":
Refer to "Certification for keyless access
with push-button start system" .
For models without "keyless access
with push-button start system":
U.S.-spec. models
FCC ID: MOZRI-38BFH
CAUTION
FC ...
