Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

1. Temporarily tighten the nuts which secure the center exhaust pipe to the front exhaust pipe.

NOTE:

Use a new gasket.

2. Install the bolts, springs, and nuts which secure the rear exhaust pipe to the center exhaust pipe.

NOTE:

Use a new gasket.

Tightening torque:

18 N·m (1.8 kgf-m, 13.3 ft-lb)

3. Tighten the bolts which secure the center exhaust pipe to the hanger bracket.

Tightening torque:

35 N·m (3.6 kgf-m, 25.8 ft-lb)

4. Tighten the nuts which secure the center exhaust pipe to the front exhaust pipe.

Tightening torque:

42.5 N·m (4.3 kgf-m, 31.3 ft-lb)

Assembly
Install each cover to the center exhaust pipe.Tightening torque:13 N·m (1.3 kgf-m, 9.6 ft-lb) ...

Inspection
1. Check the connections and welded parts for exhaust leaks.2. Make sure there are no holes or rusting. ...

Other materials:

Dtc b1808 short in passenger's airbag (to +b)
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Short circuit failure in power supply (shorted in main harness power supply, shorted in passenger’s airbag power supply, shorted in airbag CM internal circuit power supply)CAUTION:Before performing diagnosis, re ...

© 2017-2024 Copyright www.sulegacy.com