1. Install the arm assembly - windshield wiper. NOTE: Since the arm assembly - windshield wiper LH and RH can interfere with each other, install the passenger’s side first. (1) Assemble the arm assembly - windshield wiper so that the blade assembly - windshield wiper is aligned to the ceramic print point mark of the windshield glass. (2) Tighten the arm assembly - windshield wiper to specified torque and install the cap. Tightening torque: 22 N·m (2.2 kgf-m, 16.2 ft-lb) 2. Check the position of windshield wiper. Front Wiper Arm > ADJUSTMENT |
Dtc p014c a/f / o2 sensor slow response - rich to lean bank 1 sensor 1
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CHECK EXHAUST SYSTEM.NOTE:Check the foll ...