Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Wiper and washer systems / Rear wiper arm / Installation

1. Install the arm assembly - rear wiper.

(1) Assemble the blade assembly - rear wiper aligning it with the marking on the glass.

(2) Tighten the arm assembly - rear wiper to the specified torque, and install the cover - rear wiper arm.

Tightening torque:

8 N·m (0.8 kgf-m, 5.9 ft-lb)

2. Check the position of rear wiper. Rear Wiper Arm > ADJUSTMENT

Adjustment

1. Operate the rear wiper once.2. Check that the wiper blade is aligned with the point mark.3. If the wiper blade is not aligned with the point mark, perform the removal and installation of the rear w ...

Rear wiper motor

...

Other materials:

Dtc b2a0d airbag signal
DIAGNOSIS START CONDITION:When ignition switch is ON.DTC DETECTING CONDITION:Either the regular signal or collision signal cannot be detected from the airbag CM for at least 2 seconds.TROUBLE SYMPTOM:• ACN function does not operate.• RED LED illuminates.WIRING DIAGRAM:NOTE:For the coupli ...