Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. Install the glass - front door partition. 2. Install the running channel - front door and the sash assembly - partition. CAUTION: Check that the running channel - front door is securely fixed to the panel assembly - front door and to the sash assembly - partition. Tightening torque: Refer to “COMPONENT” of “General Description”. General Description > COMPONENT NOTE: Tighten the sash assembly - partition in the following order.
3. Install the glass assembly - front door. Tightening torque: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 4. Install the front door inner pad. 5. Install the sealing cover - front door. 6. Install the trim panel - front door. Door Trim > INSTALLATION 7. Connect the ground terminal to battery sensor. NOTE |
Removal
1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the trim panel - front door. Door Trim > REMOVAL3. Remove the sealing ...
Other materials:
Installation
1. Temporarily tighten the nuts which secure the center exhaust pipe to the front exhaust pipe.NOTE:Use a new gasket.2. Install the bolts, springs, and nuts which secure the rear exhaust pipe to the center exhaust pipe.NOTE:Use a new gasket.Tightening torque:18 N·m (1.8 kgf-m, 13.3 ft-lb)3. T ...
