Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Glass windows mirrors / Outer mirror assembly / Installation

CAUTION:

Be careful not to catch the harness in between the parts.

1. Install the outer mirror assembly.

Tightening torque:

7.5 N·m (0.8 kgf-m, 5.5 ft-lb)

2. Install the sealing cover - front door.

3. Install the trim panel - front door. Door Trim > INSTALLATION

4. Connect the ground terminal to battery sensor. NOTE

Assembly

CAUTION:Be careful not to catch the harness in between the parts.1. Install the light assembly - side turn mirror.2. Install the cover - cap outer mirror.3. Install the cover - cap outer mirror lower. ...

Inspection

1. CHECK OPERATION1. Check the mirror operation when battery voltage is applied between the connector terminals.Terminal No.Inspection conditionsSwitch position — — OFF4 (+) — 3 (−)Apply ...

Other materials:

Daytime running light system
WARNING The brightness of the illumination of the high beam headlights is reduced by the daytime running light system. The light switch must always be turned to the " " position when it is dark outside. The high beam headlights will automatically illuminate at re ...