Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. Install the switch - door mirror to the panel - power window main switch. 2. Install the panel - power window main switch to the trim panel - front door. 3. Install the trim panel - front door. Door Trim > INSTALLATION 4. Connect the ground terminal to battery sensor. NOTE |
Inspection
1. Check the resistance between connector terminals.Preparation tool:Circuit tester• Changeover switch RHTerminal No.Inspection conditionsStandard — OFF1 M- or more1 — 129 — 7UPLess than 1 ...
Other materials:
Replacement
1. Slowly remove the protector UPR from the end of right and left protectors.CAUTION:• Be careful not to damage the surface of garnish assembly during operation.• Do not reuse the protector UPR.2. Remove the double-sided tape remaining on the garnish side, then clean the adhesive surface ...
© 2017-2026 Copyright www.sulegacy.com
