Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. Apply a coat of spray type lubricant to the mating area of cushion rubber. 2. Install the rear exhaust pipe to cushion rubber. NOTE: After assembling, degrease the lubricant which was applied to the cushion rubber while removing/installing. 3. Install the bolts and self-locking nuts which secure the muffler to the rear exhaust pipe. NOTE: Use a new gasket and self-locking nut. Tightening torque: 48 N·m (4.9 kgf-m, 35.4 ft-lb) 4. Install the bolts, springs and nuts securing the front exhaust pipe assembly to the rear exhaust pipe. NOTE: Use a new gasket. Tightening torque: 18 N·m (1.8 kgf-m, 13.3 ft-lb) 5. Lower the vehicle. |
Inspection
1. Check the connections and welded parts for exhaust leaks.2. Make sure there are no holes or rusting.3. Check the cushion rubber for wear or crack. ...
Seats
...
Other materials:
Installation
Install in the reverse order of removal while being careful of the following.1. EVAPORATION PIPE INSTALLATION1. Install the evaporation pipe to the vehicle.2. Install the evaporation pipe protector.Tightening torque:T1: 1 N·m (0.1 kgf-m, 0.7 ft-lb)T2: 7.5 N·m (0.7 kgf-m, 5.4 ft-lb)3. I ...
