1. RH SIDE 1. Install the spark plugs using a spark plug socket. Tightening torque: 18 N·m (1.8 kgf-m, 13.3 ft-lb) 2. Install the ignition coil. CAUTION: Degrease the ignition coil fixing portion and the ignition coil mounting bolt. Tightening torque: 8.0 N·m (0.8 kgf-m, 5.9 ft-lb) 3. Connect the connector to the ignition coil. 4. Install the air cleaner element and air cleaner case (rear). Air Cleaner Element > INSTALLATION 5. Connect the ground terminal to battery sensor. NOTE 2. LH SIDE 1. Install the spark plugs using a spark plug socket. Tightening torque: 18 N·m (1.8 kgf-m, 13.3 ft-lb) 2. Install the ignition coil. CAUTION: Degrease the ignition coil fixing portion and the ignition coil mounting bolt. Tightening torque: 8.0 N·m (0.8 kgf-m, 5.9 ft-lb) 3. Connect the connector to the ignition coil. 4. Install the battery. Battery > INSTALLATION |
Legacy
NOTE
It may be difficult to replace the bulbs.
We recommend that you have the bulbs
replaced by your SUBARU dealer if
necessary.
Turn the shopping bag hook 90 degrees
counterclockwise and pull it out.
Turn over the trunk trim panel.
1) Rear side marker light
2) Rear turn ...