1. RH SIDE 1. Install the spark plugs using a spark plug socket. Tightening torque: 21 N·m (2.1 kgf-m, 15.5 ft-lb)
2. Install the ignition coil. NOTE: Turn the #5 ignition coil to install it. 3. Connect the connector (B) to the ignition coil. 4. Install the engine harness stay (A). Tightening torque: T1: 6.4 N·m (0.7 kgf-m, 4.7 ft-lb) T2: 16 N·m (1.6 kgf-m, 11.8 ft-lb) 5. Install the air cleaner case. Air Cleaner Case > INSTALLATION 6. Connect the ground terminal to battery sensor. NOTE 7. Install the collector cover. 2. LH SIDE 1. Install the spark plugs using a spark plug socket. Tightening torque: 21 N·m (2.1 kgf-m, 15.5 ft-lb)
2. Install the ignition coil. NOTE: Turn the #6 ignition coil to install it. 3. Connect the connector (B) to the ignition coil. 4. Install the engine harness stay (A). Tightening torque: T1: 6.4 N·m (0.7 kgf-m, 4.7 ft-lb) T2: 16 N·m (1.6 kgf-m, 11.8 ft-lb) 5. Install the battery. Battery > INSTALLATION 6. Install the collector cover. |
Dtc p0965 pressure control solenoid "b" control circuit range/performance
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Engine speed increases abruptly, and can not accelerate.• Excessive slippage is felt.1. ENGINE TYPE FBWIRING DIAGRAM:CVT control system CVT Control System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK DTC.Read the DTC usi ...