1. GLASS LID 1. Install the lid assembly - sunroof. Tightening torque: 4.5 N·m (0.5 kgf-m, 3.3 ft-lb) 2. Perform the open/close operation checks for the glass lid. 3. Check the height of the lid assembly - sunroof and the roof panel, and perform adjustment when there is a difference between up and down, and left and right. Glass Lid > ADJUSTMENT 4. Install the lid cover. 2. DEFLECTOR ASSEMBLY 1. Install the deflector assembly - sunroof. CAUTION: When the hook is removed, be careful of the hook direction. 2. After installation, measure the height from the roof panel when deflector assembly - sunroof is activated.
|
Dtc p2420 evap system switching valve control circuit high
DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:• Engine Electrical System ENGINE TYPE EZ (WITHOUT PUSH BUTTON ST ...