1. Before installation, inspect the following items and replace any faulty part with a new part. • Control module is deformed. • Control module connector is damaged. • Control module mounting bracket is damaged. 2. Install the airbag control module. CAUTION: Do not reuse the bolt and nut. Always replace with the specified new bolts and nuts. Tightening torque: 25 N·m (2.5 kgf-m, 18.4 ft-lb) 3. Install the cover - shift lever and the console box assembly. Tightening torque: 6.5 N·m (0.7 kgf-m, 4.8 ft-lb) 4. Connect the ground terminal to battery sensor. NOTE |
Refrigerant leak check inspection
1. Attach the manifold gauge set.Preparation tool:Manifold gauge set(1) Check that all valves are fully closed.(2) Install the low/high pressure hoses to the service ports on the low/high pressure sides of the vehicle respectively.CAUTION:Confirm that the connections are secure.(3) Start the engine, ...