CAUTION: • If the airbag has been activated, replace the front sub sensor with a new part. • Do not reuse the bolt and nut. Always replace with the specified new bolts and nuts. • When installing the sensor, insert the set pin on the backside of the sensor into the hole on the body side securely. 1. Before installation, inspect the following items and replace any faulty part with a new part. • Front sub sensor or connector is damaged. 2. Install the front sub sensor. Tightening torque: 13 N·m (1.3 kgf-m, 9.6 ft-lb) 3. Install the air intake duct. (When removing the sensor RH) 4. Connect the ground terminal to battery sensor. NOTE |
Dtc b28ab stereo camera microcomputer 2
Detected when communication error occurs due to malfunction of microcomputer inside the stereo camera.DTC DETECTING CONDITION:Communication error occurs due to malfunction of microcomputer inside the stereo camera.TROUBLE SYMPTOM:All functions of EyeSight system do not operate.Refer to DTC B28A6 for ...