Subaru Legacy BN/BS (2015-2019) Service Manual: Intake and exhaust valve specification

Subaru Legacy BN/BS (2015-2019) Service Manual / Mechanical(h4do) / Intake and exhaust valve specification

Refer to “Cylinder Head” for removal and installation procedures of the intake and exhaust valves. Cylinder Head > REMOVAL Cylinder Head > INSTALLATION

Ignition timing inspection

CAUTION:After warming-up, engine becomes very hot. Be careful not to burn yourself at measurement.1. Before checking the ignition timing, check the following item:(1) Check the air cleaner element is ...

Intake manifold vacuum inspection

1. Warm up the engine.2. Disconnect the brake booster vacuum hose from the intake manifold assembly.3. Connect the vacuum gauge to the installation area for the brake booster vacuum hose of the intake ...

Other materials:

Dtc p0134 a/f / o2 sensor circuit no activity detected bank 1 sensor 1
DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:• Engine Electrical System ENGINE TYPE EZ (WITHOUT PUSH BUTTON ST ...