Subaru Legacy BN/BS (2015-2019) Owners Manual: Legacy

Subaru Legacy BN/BS (2015-2019) Owners Manual / Maintenance and service / Replacing bulbs / License plate light / Legacy

NOTE It may be difficult to replace the bulbs.

We recommend that you have the bulbs replaced by your SUBARU dealer if necessary.

Open the trunk.

Legacy

Remove the trunk trim lining by removing the clips indicated in the illustration.

Legacy

Turn the bulb socket counterclockwise and remove it.
Pull the bulb out of the bulb socket and replace it with a new one.
Install the bulb socket by turning it clockwise.
Reconnect the electrical connector.
Reinstall the trunk trim lining.

Outback

The license plate light must be pushed inwards, and then pulled out to be removed. Turn the bulb socket counterclockwise and pull out the socket. Pull the bulb out of the so ...

Other materials:

Installation
CAUTION:• Be sure to use a new flange nut and self-locking nut.• Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.1. Install the nut of shock mount - rear.Tightening torque:30 N·m (3.1 kgf-m, 22.1 ft-lb) ...