Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: List

Item

Display

Note

Trip Count

General Description > CAUTION

Count

Time Count [msec]

Belt Buckle Switch LH

Unbelted/Belted/Other

“Belted” when the left side seat belt is fastened

“Unbelted” when the left side seat belt is not fastened

“Other” in other cases

Belt Buckle Switch RH

Unbelted/Belted/Other

“Belted” when the right side seat belt is fastened

“Unbelted” when the right side seat belt is not fastened

“Other” in other cases

Passenger Occupant Status

Occupied/Adult/Child/Empty or CRS

“Occupied” when the occupant is present

“Adult”

“Child”

“Empty or CRS” when the seat is unoccupied or when child restraint seat is installed

CAUTION:

When checking the operating status, be careful of the followings.

When the seat is unoccupied: Do not place anything on the seat.

Child restraint seat: Install the seat according to its instruction manual.

When the seat is occupied: Someone who weighs at least approx. 70 kg (155 lb) must be seated during the check.

Passenger Airbag Status

ON/OFF

“ON” when the passenger occupant status is “Occupied”

“OFF” when the status is “Empty or CRS”

Data record No.

No Definition/1

Displays “1” when any EDR data is recorded.

Data record No.

No Definition/1

Displays “1” when any EDR data is recorded.

Operation
Check the operating condition of each sensor in the event of malfunction in the seat belt buckle switch, or when the seat belt buckle switch has been replaced.1. On «Start» display, select «Diagnos ...

Subaru select monitor
...

Other materials:

Assembly
NOTE:• Match the alignment marks, and install the coupling sleeve and then install the shifting insert.• Make sure that there is no large clearance at both sides of the shifting insert after assembly.(A)Shifting insert(B)Synchronizer hub(C)Coupling sleeve(D)There is no large clearance at ...

© 2017-2024 Copyright www.sulegacy.com