Subaru Legacy BN/BS (2015-2019) Service Manual: Malfunction indicator light does not come on
TROUBLE SYMPTOM: When the ignition switch is turned to ON (engine OFF), malfunction indicator light does not illuminate. STEP | CHECK | YES | NO | | Is DTC of LAN system displayed- Read Diagnostic Trouble Code (DTC) > OPERATION | Check the appropriate DTC using the “List of Diagnostic Trouble Code (DTC)”. List of Diagnostic Trouble Code (DTC) | Replace the meter case assembly of combination meter. Combination Meter |
|
TROUBLE SYMPTOM:Although malfunction indicator light comes on when the engine runs, DTC is not shown on the Subaru Select Monitor or general scan tool display.STEPCHECKYESNO1.CHECK DTC.Is DTC of engin ...
1. When the ignition switch is turned to ON (engine OFF), the malfunction indicator light (A) in the combination meter illuminates.NOTE:If the malfunction indicator light does not illuminate, perform ...
Other materials:
22
Malfunction related to vehicle speed sensor is detected.DIAGNOSIS:Open or shorted circuit in vehicle speed sensor system.TROUBLE SYMPTOM:Cruise control cannot be set. (Cancelled immediately.)STEPCHECKYESNO1.CHECK ABS OR VDC WARNING LIGHT.1) Turn the ignition switch to ON.2) After the initial operati ...