Subaru Legacy BN/BS (2015-2019) Service Manual: Mass air flow and intake air temperature sensor

Installation

1. Install the manifold absolute pressure sensor to the intake manifold assembly, and connect the connector to the manifold absolute pressure sensor.NOTE:Use new O-rings.Tightening torque:3.4 N· ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Disconnect the connector (A) from the mass air flow and intake air temperature sensor, and remove the mass air flow and intake air temper ...

Other materials:

Removal
1. SEDAN MODEL1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the trim panel assembly - rear shelf. Rear Shelf Trim > REMOVAL3. Remove the woofer assembly.(1) Disconnect the connector.(2) Remove the bolts, then remove ...