Your desired rear gate height can be registered. Registration of the rear gate height: To register the rear gate height, perform the following procedures while the ignition switch is in the "LOCK"/"OFF" position.
NOTE
Retrieval of the rear gate height: To open the rear gate and stop it at the registered height, perform the following procedure.
Even if any of the power rear gate switches are pressed and held while the memory switch is in the OFF status, you can stop it at the registered height by pressing the memory switch to select the ON status before the rear gate reaches the registered height. NOTE The rear gate will open to the position that is stored in the memory function even if the rear gate is opened by the reverse function. |
Dtc c1241 rear left abs sensor circuit
DTC DETECTING CONDITION:Judge as malfunction when the current value of the wheel speed sensor is out of normal range for a predetermined time or more.TROUBLE SYMPTOM:• ABS does not operate.• VDC does not operate.• Hill hold does not function.• EyeSight does not operate. (Mode ...