Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Owners Manual: Memory function (driver's seat - if equipped)

WARNING
  •  To avoid loss of vehicle control or personal injury, never perform the following operations while driving.
  •  Adjusting the seat
  •  Retrieving the seat position
  •  Before adjusting the seat, make sure that cargo or the hands and feet of rear seat passengers are clear of the adjusting mechanism.
  •  Perform the seat position retrieval before driving. Be sure to confirm that the select lever is in the "P" position, and the parking brake is applied, when adjusting the seat position. Do not drive until the retrieval of the seat position is complete.
  •  When retrieving a registered seat position, make sure the hands, feet and possessions of rear seat passengers are clear of the seat adjusting mechanism.
  •  When any unusual conditions or malfunctions occur during the retrieval of the seat position, stop the retrieval of the seat position by performing any of the following procedures.
  •  Operate any of the power seat switches
  •  Press the "SET" button
  •  Press button "1" or "2"

Some of your desired seat positions can be registered. Register the seat position with button "1" or "2" or each of the access keys and retrieve the seat position.

The following seat positions can be registered.

  •  Forward/backward position of the seat
  •  Angle of seatback
  •  Angle of seat cushion
  •  Height of seat

Registration of seat position with button "1" or "2"

  1.  Adjust the seat position under the following conditions.
  •  The parking brake is applied.
  •  The select lever is in the "P" position.

Memory function

  1. While pressing the "SET" button, press and hold the desired button "1" or "2".

A chirp sounds once, and the seat position is registered.

Registration of seat position with each access key

  1.  Adjust the seat position under the following conditions.
  •  The parking brake is applied.
  •  The ignition switch is in the "LOCK"/ "OFF" position.
  •  The select lever is in the "P" position.

Memory function

  1. While holding the access key and pressing the "SET" button, press the " " button of the access key.

A chirp sounds once, and the seat position is registered.

Retrieval of seat position registered with button "1" or "2"

WARNING Be sure to press the correct button to retrieve your registered seat position. If the seat position is not optimum for you, it may adversely affect your driving and may reduce the effectiveness of the seatbelt.

That could result in an accident involving serious injury or death.

Memory function

  1. Turn the ignition switch to the "ON" position.
  2.  While the select lever is in the "P" position and the parking brake is applied, press button "1" or "2".

A chirp sounds and the seat moves to the registered position. When the seat moves to the registered position, a chirp will sound.

NOTE

  •  If a new position is registered for the same button, the previously registered seat position is deleted.
  •  If the vehicle battery is removed, the registered seat position is not deleted.
  •  When the button "1" or "2" is pressed within 45 seconds after the driver's door is opened, the registered seat position can be retrieved even if the ignition switch is in the "LOCK" or "OFF" position.

Retrieval of the seat position registered with access key

  1.  Hold the registered access key.

Memory function

  1. Unlock the driver's door by pressing the " " button or gripping the door handle.
  2.  Open the driver's door.

A chirp sounds and the seat moves to the registered position. When the seat moves to the registered position, a chirp will sound.

NOTE

  •  If the registered seat position cannot be retrieved after performing the previous procedures, try the following procedures.
  1.  Press the "SET" button on the driver's door.
  2.  Press the " " button on the access key or touch the door lock sensor to lock the doors.
  3.  Perform the prior procedures again.
  •  If the keyless access function is disabled, the seat position cannot be retrieved by gripping the driver's door handle. However, the seat position can still be retrieved by pressing the " " button on the access key. For information about how to enable/disable the keyless access function, refer to "Disabling keyless access function" .
  •  If a new position is registered for the same access key, the previously registered seat position is deleted.

Clearing the registered seat position with access key

  1. Close the driver's door.
  2. While holding the access key and pressing the "SET" button, press the " " button on the access key.

A chirp will sound, and the registered seat position will be cleared.

Front passenger's seat (if equipped)
Seat position forward/backward control switch To adjust the seat forward or backward, move the control switch forward or backward.  Seatback angle (reclining) control switch ...

Head restraint adjustment
WARNING  Never drive the vehicle with the head restraints removed because they are designed to reduce the risk of serious neck injury in the event that the vehicle is s ...

Other materials:

Installation
CAUTION:When the ECM of model with immobilizer has been replaced, be sure to perform the registration of immobilizer system. (Refer to the “REGISTRATION MANUAL FOR IMMOBILIZER”.)NOTE:When replacing the ECM, be careful not to use the ECM of wrong specification to avoid any damage on the f ...

© 2017-2024 Copyright www.sulegacy.com