Subaru Legacy Owners Manual: Monitor (if equipped)

Subaru Legacy Owners Manual / Appearance care / Cleaning the interior / Monitor (if equipped)

To clean the audio/navigation monitor, wipe it with a silicone cloth or with a soft cloth. If the monitor is extremely dirty, clean it with a soft cloth moistened with neutral detergent then carefully wipe off any remaining detergent.

CAUTION

Do not spray neutral detergent directly onto the monitor. Doing so could damage the monitor's components.
Do not wipe the monitor with a hard cloth. Doing so could scratch the monitor.
Do not use cleaning fluid that contains thinner, gasoline, or any other volatile substance. Such cleaning fluid could erase the lettering on the switches at the bottom of the monitor.

Climate control panel, audio panel, instrument panel, console panel, switches, combination meter, and other plastic surface

Use a soft, damp cloth to clean the climate control panel, audio equipment, instrument panel, center console, combination meter panel, and switches. CAUTION Do not use organic sol ...

Maintenance and service

...

Other materials:

Dtc p0463 fuel level sensor "a" circuit high
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CHECK FOR ANY OTHER DTC ON DISPLAY.Is DT ...