Subaru Legacy BN/BS (2015-2019) Service Manual: Note
For procedure of each component in the air conditioning system, refer to the respective section. • Blower motor unit assembly: Blower Motor Unit Assembly • Blower motor: Blower Motor • Power transistor (auto A/C model): Power Transistor (Auto A/C Model) • Blower resistor (manual A/C model): Blower Resistor (Manual A/C Model) • Control panel: Control Panel • Control module: Control Unit • Compressor: Compressor • Condenser: Condenser • Heater and cooling unit: Heater and Cooling Unit • Evaporator: Evaporator • Expansion valve: Expansion Valve • Hose & pipe: Hose and Pipe • Ambient sensor: Ambient Sensor • Sunload sensor (auto A/C model): Sunload Sensor (Auto A/C Model) • In-vehicle sensor (auto A/C model): In-Vehicle Sensor (Auto A/C Model) • Evaporator sensor: Evaporator Sensor • Intake door actuator: FRESH/RECIRC Door Actuator • Mode door actuator: Mode Door Actuator • Air mix door actuator: Air Mix Door Actuator • Rear vent actuator: Rear Vent Door Actuator |
Electrical specification
Refer to “Auto A/C Control Module I/O Signal” of “HVAC SYSTEM (DIAGNOSTICS)” section. Control Module I/O Signal > ELECTRICAL SPECIFICATION ...
Inspection
Refer to “Basic Diagnostic Procedure” of “HVAC SYSTEM (DIAGNOSTICS)” section. Basic Diagnostic Procedure ...
Other materials:
SUBARU advanced frontal airbag operation
Driver's side
Passenger's side
The SUBARU advanced frontal airbag
system is designed to determine the
activation or deactivation condition of the
front passenger's SRS frontal airbag
depending on the total load on the front
passenger's seat monitored by the front
passenger's ...
