For procedure of each component in the power window system, refer to the respective section. • Power window control switch: Power Window Control Switch • Front door glass: Front Door Glass • Front regulator and motor assembly: Front Regulator and Motor Assembly • Rear door glass: Rear Door Glass • Rear regulator and motor assembly: Rear Regulator and Motor Assembly |
Installation
1. Install the purge control solenoid valve, and connect the connector and vacuum hose to the purge control solenoid valve.NOTE:Connect the vacuum hose as shown in the figure.(a)To intake manifold(b)To fuel pipe Tightening torque:19 N·m (1.9 kgf-m, 14.0 ft-lb)2. Install the air intake boot. ...