Subaru Legacy BN/BS (2015-2019) Service Manual: Oil pressure switch

Installation

1. OIL PAN AND STRAINER1. Attach the oil strainer to the oil pan upper.NOTE:Use new O-rings.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 ft-lb)(A)O-ring(B)Oil strainer2. Apply liquid gasket to the ...

Removal

CAUTION:If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.1. Disconnect the ground terminal from battery sensor. NOT ...

Other materials:

Replacement
1. DRAINING OF ENGINE COOLANT1. Lift up the vehicle.2. Remove the under cover. Front Under Cover > REMOVAL3. Connect a hose with inner diameter of φ8 mm (0.315 in) to the drain outlet of the radiator.4. Loosen the drain plug to drain engine coolant into a container.NOTE:Remove the radiator cap ...