Subaru Legacy BN/BS (2015-2019) Service Manual: Operation
When the ACC cancel code is detected from the stereo camera, the cruise control will be cancelled. 1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «EyeSight» and select «Enter». 5. On «Select Function» display, select «Cancel Code». 6. On «Cancel Code» display, select «Cancel Code of ACC Cruise Control». NOTE: • For detailed operation procedures, refer to “Application help”. • Up to eight codes can be stored. When more than eight codes are output, the oldest code will be deleted to store the latest code. • Stored codes will be cleared by Clear Memory. • For details on ACC cancel codes, refer to List of ACC cancel code. ACC Cancel Code(s) Display > LIST |
List
• List of ACC cancel code(s)ACC cancel codeItemContents of diagnosis02ACC Mode:Maintaining Standstill PositionDisplayed when the cruise control is cancelled after the own vehicle stops following ...
Other materials:
Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the light assembly - door step.CAUTION:• Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.• When using a flat tip screwdriver, apply protective tape or cloth and be careful not ...
