1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «EyeSight» and select «Enter». 5. On «Select Function» display, select «DTC». NOTE: • For detailed operation procedures, refer to “Application help”. • For details concerning DTC, refer to “List of Diagnostic Trouble Code (DTC)”. Diagnostic Code(s) Display > LIST • Up to ten codes can be stored. When more than ten codes are output, they will not be stored. • The same code is stored only once, and even when the same code occurs several times, information will not be updated. |
Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the light assembly - door step.CAUTION:• Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.• When using a flat tip screwdriver, apply protective tape or cloth and be careful not ...