1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «Headlight / Foglight» and then select «Enter». 5. On «Select Function» display, select «Data Monitor». NOTE: For detailed operation procedures, refer to “Application help”. |
ListDtc c2547 eyesight check sum
DTC DETECTING CONDITION:When check sum error of EyeSight transmission data is detected after the ignition switch is ON.TROUBLE SYMPTOM:EyeSight steering support function does not operate.STEPCHECKYESNO1.CHECK POOR CONTACT OF CONNECTOR.Is there poor contact of the stereo camera connector-Repair the p ...