Check the operating condition of each sensor in the event of malfunction in the seat belt buckle switch, or when the seat belt buckle switch has been replaced. 1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «Airbag» and select «Enter». 5. On «Airbag» display, select «Data monitor». NOTE: For detailed operation procedures, refer to “Application help”. |
Assembly
1. Install the reverse brake. Reverse Brake Assembly > ASSEMBLY2. install all plugs to intermediate case.Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)NOTE:Use new O-rings.3. Install the parking support.Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)4. Install the CVTF filler plug. ...