1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «Subaru Rear Vehicle Detection(RH)» or «Subaru Rear Vehicle Detection(LH)» and then select «Enter». 5. On «Select Function» display, select «Data Monitor». NOTE: For detailed operation procedures, refer to “Application help”. |
Procedure
1. Clean the transmission exterior.2. Remove the torque converter assembly. Torque Converter Assembly > REMOVAL3. Attach the ST on the transmission.ST 18632AA000STAND ASSY4. Remove the transmission cover on the transmission upper side.NOTE:Install using the following tightening torque.Tightening ...