Subaru Legacy BN/BS (2015-2019) Service Manual: Preparation for overhaul procedure
1. After removing the engine from the vehicle body, attach the ST to the engine as shown in the figure. NOTE: When using a commercially sold engine stand, follow the instructions of engine stand used. Tightening torque: 35 N·m (3.6 kgf-m, 25.8 ft-lb)
2. In this section the procedures described under each index are all connected and stated in order. The procedure for overhauling of the engine will be completed when you go through all steps in the process. Therefore, in this section, to conduct the particular procedure within the flow of a section, you need to go back and conduct the procedure described previously in order to do that particular procedure. |
Piston specification
Refer to “Cylinder Block” for removal and installation procedures of pistons. Cylinder Block > REMOVAL Cylinder Block > INSTALLATION ...
Cam sprocket
...
Other materials:
Dtc u0424 invalid data received from hvac control module
NOTE:Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure1. OUTLINE OF DIAGNOSIS• Detect malfunction of CAN communication.• Judge as NG when data received from the A/C control panel is not normal.2. EXECUTION CONDITIONSecondary ParametersE ...
