Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Preparation tool

1. SPECIAL TOOL

TEST HARNESS N

ILLUSTRATION

TOOL NUMBER

DESCRIPTION

REMARKS

98299SA000

TEST HARNESS N

Used for unit inspection of steering roll connector.

TEST HARNESS Q

ILLUSTRATION

TOOL NUMBER

DESCRIPTION

REMARKS

98299SA040

TEST HARNESS Q

Used for unit inspection of steering roll connector.

TEST HARNESS ADAPTER D

ILLUSTRATION

TOOL NUMBER

DESCRIPTION

REMARKS

98299SA010

TEST HARNESS ADAPTER D

Used for operation process of curtain airbag module.

Used together with AIRBAG DEPLOYMENT TOOL. (98299PA030)

TEST HARNESS ADAPTER AM

ILLUSTRATION

TOOL NUMBER

DESCRIPTION

REMARKS

98299FJ000

TEST HARNESS ADAPTER AM

Used for operation process of passenger’s airbag module.

Used together with AIRBAG DEPLOYMENT TOOL. (98299PA030)

TEST HARNESS ADAPTER AU

ILLUSTRATION

TOOL NUMBER

DESCRIPTION

REMARKS

98299AL000

(Newly adopted tool)

TEST HARNESS ADAPTER AU

Used for operation process of seat cushion airbag module.

Used together with AIRBAG DEPLOYMENT TOOL. (98299PA030)

TEST HARNESS ADAPTER AR

ILLUSTRATION

TOOL NUMBER

DESCRIPTION

REMARKS

98299CA000

TEST HARNESS ADAPTER AR

Used for operation process of side airbag module.

Used together with AIRBAG DEPLOYMENT TOOL. (98299PA030)

AIRBAG DEPLOYMENT TOOL

ILLUSTRATION

TOOL NUMBER

DESCRIPTION

REMARKS

98299PA030

AIRBAG DEPLOYMENT TOOL

Used for operation process of airbag module.

Used together with each test harness adapter.

2. GENERAL TOOL

TOOL NAME

REMARKS

Steering wheel puller

Used for removing and installing the steering wheel.

TORX® T40

Used for removing and installing the beam COMPL - steering.

Circuit tester

Used for measuring resistance, voltage and current.

General description
...

Caution
1. BEFORE STARTING ALL WORKS• The airbag system (including pretensioner) is fitted with a backup power supply. After disconnecting the battery ground cable, the airbag may operate if you do not ...

Other materials:

Removal
1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the trim panel - front door. Door Trim > REMOVAL3. Remove the sealing cover - front door.CAUTION:• Carefully remove the butyl tape. Excessive force will easily brea ...

© 2017-2024 Copyright www.sulegacy.com