Subaru Legacy BN/BS (2015-2019) Service Manual: Procedure

Subaru Legacy BN/BS (2015-2019) Service Manual / Engine (diagnostics)(h4do) / Malfunction indicator light / Procedure

1. Activation of malfunction indicator light Malfunction Indicator Light > ACTIVATION OF MALFUNCTION INDICATOR LIGHT

↓

2. Malfunction indicator light does not come on Malfunction Indicator Light > MALFUNCTION INDICATOR LIGHT DOES NOT COME ON

↓

3. Malfunction indicator light does not go off Malfunction Indicator Light > MALFUNCTION INDICATOR LIGHT DOES NOT GO OFF

Malfunction indicator light does not go off

DIAGNOSIS:The malfunction indicator light circuit is shorted.TROUBLE SYMPTOM:Although malfunction indicator light comes on when the engine runs, DTC is not shown on the Subaru Select Monitor or genera ...

Malfunction indicator light does not come on

TROUBLE SYMPTOM:When the ignition switch is turned to ON (engine OFF), malfunction indicator light does not illuminate.STEPCHECKYESNO1.CHECK DTC.Is DTC of LAN system displayed- Read Diagnostic Troubl ...

Other materials:

Dtc p2021 tgv position sensor/switch circuit low bank 2
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Improper idling• Engine stalls.• Poor driving performanceCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PRO ...