Subaru Legacy BN/BS (2015-2019) Service Manual: Procedure

Subaru Legacy BN/BS (2015-2019) Service Manual / Hvac system (heater ventilator and a c) / Compressor oil / Procedure

NOTE:

Before making repairs, perform the oil return operation to return the compressor oil in circulation with the refrigerant to the compressor.

1. Increase the engine speed to 1,500 r/min.

2. Turn the A/C switch to ON.

3. Turn the temperature control dial to LO (MAX COOL).

4. Turn the FRESH/RECIRC switch to RECIRC position.

5. Turn the fan switch or dial to HI (MAX).

6. Leave in this condition for 10 minutes.

Adjustment

• If a component has been replaced, add an appropriate amount of compressor oil (same as the amount of remaining oil in removed component).• When replacing the compressor, the new compress ...

Other materials:

Removal
1. Remove the manual transmission assembly from the vehicle. Manual Transmission Assembly > REMOVAL2. Remove the back-up light switch and the neutral position switch. Switches and Harness > REMOVAL3. Remove the transfer case together with the extension case assembly. Transfer Case and Extension C ...