Subaru Legacy BN/BS (2015-2019) Service Manual: Read diagnostic trouble code (dtc) operation
Read out DTCs stored in the airbag system and the occupant detection system. 1. AIRBAG SYSTEM 1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «Airbag» and select «Enter». 5. On «Airbag» display, select «DTC». NOTE: • For detailed operation procedures, refer to “Application help”. • For details concerning DTC, refer to List of Diagnostic Trouble Code (DTC) in AIRBAG SYSTEM. List of Diagnostic Trouble Code (DTC) 2. OCCUPANT DETECTION SYSTEM 1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «Occupant Detection» and then select «Enter». 5. On «Occupant Detection» display, select «DTC». NOTE: • For detailed operation procedures, refer to “Application help”. • For details concerning DTC, refer to “List of Diagnostic Trouble Code (DTC)”. List of Diagnostic Trouble Code (DTC) |
Passenger’s airbag on off indicator light illumination pattern inspection
(1)Passenger’s airbag ON indicator light(6)Light ON(10)OFF(2)Passenger’s airbag OFF indicator light(7)Empty(11)ON(3)Occupant seating(8)Child(12)Approx. 6 seconds(4)Ignition switch(9)Adult( ...
Rezero operation
NOTE:When replacing the occupant detection system, or removing or disassembling the passenger’s seat, always perform «Rezero» after installing a seat in the vehicle.CAUTION:When the trouble oc ...
Other materials:
Replacement
1. Shift the select lever or gear shift lever to neutral.2. Release the parking brake.3. Lift up the vehicle.4. Drain differential gear oil. Differential Gear Oil > REPLACEMENT5. Remove the rear exhaust pipe.• 2.5 L model Rear Exhaust Pipe > REMOVAL• 3.6 L model Rear Exhaust Pipe > REMO ...
