Subaru Legacy BN/BS (2015-2019) Service Manual: Rear oxygen sensor

Installation

1. Install the intake oil control solenoid to the chain cover, and connect the connector to the intake oil control solenoid.NOTE:• Use new O-rings.• Apply engine oil to O-ring.Tightening t ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle.3. Remove the under cover. Front Under Cover > REMOVAL4. Disconnect the rear oxygen sensor connector.(A)Front oxygen ...

Other materials:

Dtc b1875 short in front seat cushion airbag lh
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Shorted between +/− lines (shorted between rear harness lines, shorted between front seat cushion airbag LH lines, shorted between airbag CM internal lines)CAUTION:Before performing diagnosis, refer to “CA ...