Subaru Legacy BN/BS (2015-2019) Service Manual: Rear oxygen sensor

Installation

1. PULSATION DAMPER RH1. Install the pulsation damper RH to the fuel injector pipe RH.NOTE:Use a new gasket.Tightening torque:21.6 N·m (2.2 kgf-m, 15.9 ft-lb)2. Install the fuel pipe protector ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle.3. Remove the front exhaust pipe. Front Exhaust Pipe > REMOVAL4. Apply spray-type lubricant (004301003) or equivalen ...

Other materials:

Installation
1. Install the CVTF cooler (with warmer feature).Tightening torque:23 N·m (2.3 kgf-m, 17.0 ft-lb)2. Install the engine coolant inlet hose.NOTE:With the paint on the engine coolant inlet hose facing the vehicle outside, install the hose to the engine side pipe.3. Install the CVTF inlet hose an ...