Subaru Legacy BN/BS (2015-2019) Service Manual: Release bearing and lever

Disassembly

1. Remove the boot and push rod.2. Apply compressed air through clutch hose attachment hole.NOTE:Face the piston hole down and place a piece of wood underneath to prevent the piston from popping out.3 ...

Removal

1. Remove the transmission assembly from the vehicle. Manual Transmission Assembly > REMOVAL2. Remove the two clips from the release lever and remove the release bearing.CAUTION:Be careful not to def ...

Other materials:

Installation
1. SEDAN MODELCAUTION:Make sure that there is a gasket attached on the clip of the garnish assembly. If a gasket is not attached, water leakage may occur.Install the side garnish assembly.2. OUTBACK MODELCAUTION:Make sure that there is a gasket attached on the clip of the garnish assembly. If a gask ...