Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Brake / Brake hose / Removal

1. FRONT BRAKE HOSE

1. Disconnect the brake hose (a) and the brake pipe (b).

Tools used:

Flare nut wrench

2. Remove the clamp, strut mounting bolt and union bolt, and remove the front brake hose.

2. REAR BRAKE HOSE

1. Remove the brake hose bracket bolt and union bolt.

2. Disconnect the brake pipe (a).

Tools used:

Flare nut wrench

3. Remove the brake hose clamp (b), and remove the rear brake hose (c).

Inspection

Check the hose for crack, interference with other parts, damage, and fluid leakage on connecting sections. If any faulty is found, repair or replace the relevant part. ...

Other materials:

Dtc p013b o2 sensor slow response - lean to rich bank 1 sensor 2
NOTE:For the diagnostic procedure, refer to DTC P013A. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P013A O2 SENSOR SLOW RESPONSE - RICH TO LEAN BANK 1 SENSOR 21. OUTLINE OF DIAGNOSISDetect the slow response of lean > rich for rear oxygen sensor output.After the deceleration fuel c ...