1. 16-INCH TYPE 1. Lift up the vehicle, and then remove the front wheels. 2. Remove the pad - disc brake front. NOTE: Do not disconnect the brake hose from the caliper body assembly. (1) Remove the caliper bolt on the lower side. (2) Lift the caliper body assembly. (3) Remove the spring - brake pad and the pad - disc brake front. 2. 17-INCH TYPE 1. Lift up the vehicle, and then remove the front wheels. 2. Remove the pad - disc brake front. (1) Remove the caliper bolt on the lower side. (2) Raise the caliper body assembly and remove the pad - disc brake front. NOTE: Do not disconnect the brake hose from the caliper body assembly. |
Inspection mode procedure
It is possible to diagnose the DTC by performing the indicated inspection mode. After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and the DTC is recorded.1. INSPECTION MODE 1DTCItemNoteB2600LIN COMMUNICATION — B2601LIN CIRCUIT LOW †...