1. Release the parking brake. 2. Using the Subaru Select Monitor, go to the brake maintenance mode according to the display screen. Parking Brake System > OPERATION NOTE: For detailed operation procedures, refer to “Application help”. 3. Disconnect the ground terminal from battery sensor. NOTE 4. Lift up the vehicle, and then remove the rear wheels. 5. Remove the pad - disc brake rear. (1) Disconnect the connector. (2) Remove the pad clip and the brake hose bracket. (3) Remove the cap and the caliper bolt, and remove the caliper body assembly. (4) Remove the pad - disc brake rear. Preparation tool: Hexagon wrench: 7 mm (0.28 in) |
BSD/RCTA approach indicator light/warning
buzzer
While the BSD/RCTA is active, the following
item(s) will operate to alert the driver:
The BSD/RCTA approach indicator
light (when there are vehicles in the
neighboring lanes).
The BSD/RCTA approach indicator
light and warning buzzer (when a vehicle
is approaching from the ...