1. Remove the transmission assembly. Manual Transmission Assembly > REMOVAL 2. Remove the clutch cover and clutch disc. Clutch Disc and Cover > REMOVAL 3. Attach the ST.
4. Remove the flywheel and crankshaft position sensor plate. 5. Drive out the pilot bearing from the flywheel. |
Operating conditions
The Reverse Automatic Braking system
will operate when all of the following
conditions are met.
The ignition switch is in the "ON"
position
The EyeSight warning indicator is off
The RAB warning indicator is off
HALT (Reverse Automatic Braking
system OFF) indic ...