CAUTION: • Be careful not to spill the brake fluid. Brake fluid spilled on the vehicle body will harm the paint surface; wash it off with water and wipe clean quickly if spilled. • Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION 1. Turn the ignition switch to OFF. 2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE 3. Drain the brake fluid. Clutch Fluid 4. Remove the instrument panel lower cover. Instrument Panel Lower Cover > REMOVAL 5. Remove the steering column. Steering Column > REMOVAL 6. Remove the pedal assembly. Clutch Pedal > REMOVAL 7. Remove the clip and clevis pin, and then remove the push rod of the master cylinder.
8. Disconnect the clutch stroke sensor connector. 9. Remove the clutch pipe from the master cylinder. 10. Remove the master cylinder from the pedal bracket.
|
Removal
1. WATER PIPE ASSEMBLY RH1. Disconnect the ground terminal from battery sensor. NOTE2. Drain engine coolant. Engine Coolant > REPLACEMENT3. Remove the front exhaust pipe. Front Exhaust Pipe > REMOVAL4. Disconnect the engine coolant hose (A) from the water pipe assembly RH, and remove the bolt (B) ...