Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
CAUTION: Brake fluid spilled on the vehicle body will harm the paint surface; therefore, wash it off with water and wipe clean quickly if spilled. 1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the clip (A) from the air intake boot. 3. Loosen the clamp (B) connecting the air intake boot and air cleaner case (rear). 4. Loosen the clamp (C) which connects the air intake boot and throttle body.
5. Remove the air intake boot from the throttle body, and move it to the left side wheel apron.
6. Disconnect the clutch hose. CAUTION: Cover the hose joint to prevent the brake fluid from flowing out.
7. Remove the operating cylinder.
|
Assembly
NOTE:During assembly, apply hydraulic oil to all parts.Recommended brake fluid:New FMVSS No. 116 DOT3 or DOT41. Install the piston spring.2. Insert piston into the operating cylinder.3. Install push r ...
Other materials:
Removal
CAUTION:When removing the front seat, disconnect the ground cable from the battery before disconnecting the airbag system and the occupant detection system harness connector, and wait for 60 seconds before starting the operation.1. POWER SEAT SWITCH1. Remove the seat from vehicle. Front Seat > REMO ...
