1. Remove the transmission assembly from the vehicle. Manual Transmission Assembly > REMOVAL 2. Remove the two clips from the release lever and remove the release bearing. CAUTION: Be careful not to deform the clips. 3. Remove the dust cover.
4. Remove the attachment point of lever spring by inserting a screwdriver through the clutch housing release lever hole. Then remove the release lever.
|
How to use the rear view camera
When performing the following procedure,
the rear view camera automatically displays
the rear view image from the
vehicle.
Set the ignition switch to "ON".
Set the shift lever or select lever to "R".
When any of the following conditions
occur, the image before setting to "R" ...